CCalclabhub

Math · 64 calculations

Geometry

How To Calculate The Volume Of A Torus

A torus volume calculation tells you how much space lies inside a doughnut-shaped solid, the shape made by spinning a circle around a straight axis in its own plane. The result depends on just two lengths: the major radius from the axis to the centre of the tube, and the minor radius of the tube itself. Because the minor radius is squared, a small change in tube thickness changes the enclosed volume far more than the same change in the size of the ring.

Quick Answer

V = 2 * pi^2 * R * r^2

V
Volume enclosed by the torus, in cubic units
R
Major radius, from the axis to the centre of the tube
r
Minor radius, the radius of the tube itself
pi
The constant 3.141592653589793, appearing twice in the formula

Measure the major radius R from the axis to the centre of the tube and the minor radius r across the tube itself, then square r and multiply by R and by two times pi squared. With the defaults R = 5 and r = 3 the volume is 888.2643960980423 cubic units. The same inputs give a surface area of 592.1762640653615 square units, a cross-section area of 28.274333882308138 and a centreline circumference of 31.41592653589793 units.

What Is The Volume Of A Torus?

A torus is the solid generated when a circle is revolved about a straight line lying in the same plane but not cutting the circle. The result is the familiar doughnut or ring shape, with a hole through the middle and a circular cross-section all the way around. The line about which the circle turns is the axis of revolution, and the path traced by the centre of the circle is called the centreline. A ring-shaped pastry, a vehicle tyre and an inflatable swim ring are everyday approximations of the form.

Two lengths determine the whole solid. The major radius R runs from the axis of revolution to the centre of the generating circle, so it fixes the radius of the centreline and the overall size of the ring. The minor radius r is the radius of the generating circle itself, so it fixes how thick the tube is. The central hole has radius R minus r, while the outermost edge sits at radius R plus r. Both radii must be measured in the same units, and the resulting volume is expressed in those units cubed.

The volume formula is a direct consequence of Pappus's centroid theorem, a classical result stating that the volume of a solid of revolution equals the area of the generating shape multiplied by the distance travelled by its centroid. The generating circle has an area of pi times r squared, and its centre travels once around a circle whose circumference is two pi times R. Multiplying the two quantities gives two pi squared times R times r squared. This is why the constant pi appears twice, once from the disc being swept out and once from the circular path that the disc follows.

The same theorem supplies the surface area. The circumference of the generating circle, two pi times r, multiplied by the distance travelled by its centre, two pi times R, gives four pi squared times R times r. Surface area therefore grows linearly in each radius, whereas volume grows with the square of the minor radius. Dividing one by the other shows that the ratio of volume to surface area simplifies to r divided by two, a tidy relationship that holds for every torus regardless of R. At the default minor radius of 3 that ratio is 1.5, and at a minor radius of 2 the two quantities are numerically equal when the same length unit is used throughout.

The cross-section taken through the tube perpendicular to the centreline is simply the original circle of radius r. Its area is pi times r squared, which comes to 28.274333882308138 square units for the default minor radius of 3. The centreline is itself a circle of radius R, with a circumference of two pi times R, or 31.41592653589793 units when R is 5. These two shapes, the disc and the path of its centre, are the building blocks of both the volume and the surface area. Seeing the solid as a disc swept around a loop makes the formula easy to reconstruct rather than needing to memorise it.

Because the minor radius is squared, it is the sensitive input. Doubling r from 3 to 6 while holding R at 5 quadruples the volume from 888.2643960980423 to 3553.0575843921692 cubic units, and doubles the surface area from 592.1762640653615 to 1184.352528130723 square units. Doubling the major radius instead, from 5 to 10, merely doubles the volume, taking it to 1776.5287921960846 cubic units. The practical consequence is that specifying the tube thickness accurately matters much more than getting the overall diameter of the ring exactly right.

The formula assumes a genuine ring, which requires the major radius to exceed the minor radius. When R equals r the inner hole shrinks to a single point and the solid becomes a horn torus; when R is smaller than r the surface passes through itself and a spindle torus results. The volume expression still returns a number in those boundary cases, but it no longer describes a simple doughnut-shaped body. A negative or zero radius has no physical meaning and should be rejected before any calculation is attempted. Checking that R is greater than r takes a moment and prevents a plausible looking but geometrically invalid answer.

Volume is always reported in cubic units, whether cubic metres for large structures, cubic centimetres for tabletop models or cubic millimetres for small machined parts. Mixing units, for example measuring R in centimetres and r in millimetres, produces a figure with no coherent interpretation. Engineers meet the same shape in rubber seals, toroidal coils, inflatable rings and heavy washers, where the enclosed volume determines the mass or the fluid capacity once the density is known. Converting the answer into litres is then a matter of applying the appropriate cubic conversion after the calculation, not before it.

A useful mental model treats a torus as a cylinder whose circular cross-section has been bent into a closed loop. The straight cylinder has a volume equal to the cross-section area times its length, and the torus uses the same product with the centreline circumference in place of that length. As the minor radius grows towards the major radius the image becomes harder to hold in mind, but the arithmetic never changes. Comparing the answer with that cylinder is therefore an exact sanity check, not an approximation.

Formula

V = 2 * pi^2 * R * r^2

Formula page →

The area of the generating circle multiplied by the circumference of the path its centre follows. With R equal to 5 and r equal to 3 the volume is 888.2643960980423 cubic units.

SymbolMeaning
RMajor radius
rMinor radius
VEnclosed volume

A = 4 * pi^2 * R * r

Formula page →

The circumference of the generating circle times the distance travelled by its centre. It shares the two radii with the volume but is linear in each, giving 592.1762640653615 square units at the defaults.

SymbolMeaning
ASurface area
RMajor radius
rMinor radius

Ac = pi * r^2 ; C = 2 * pi * R

Formula page →

The two component lengths and areas behind the main formula. Their product is the volume; for the defaults the cross-section is 28.274333882308138 square units and the centreline is 31.41592653589793 units around.

SymbolMeaning
AcCross-section area
rMinor radius
CCentreline circumference

How To Calculate The Volume Of A Torus

  1. 1

    Identify the two radii

    Find the major radius R, measured from the axis of revolution out to the centre of the tube, and the minor radius r, measured across the tube from its centre to its surface. If a drawing gives diameters instead, halve each one first, because the formula works only with radii. Confirm that both measurements use the same unit and that R is greater than r, so the shape really has a hole. Labelling the two lengths clearly on paper at this stage prevents most of the substitution errors that follow.

  2. 2

    Square the minor radius

    Multiply the minor radius by itself to obtain r squared. With the default value r equal to 3 the square is 9. The calculator stores this value in a helper named minorSq precisely because it is needed more than once. Squaring before multiplying by anything else is important: the volume responds to the square of the tube radius, not to the radius alone, and reversing the order of operations gives a completely different answer.

  3. 3

    Find the cross-section and the centreline

    Compute the area of the generating disc as pi times the squared minor radius, which is 28.274333882308138 square units at the defaults. Then find the length of the path its centre travels, two pi times R, which is 31.41592653589793 units when R is 5. These two intermediate figures are reported alongside the main result and make the structure of the calculation visible. They also provide an easy way to check the final volume, since it is simply their product.

  4. 4

    Apply the volume factor

    Multiply the cross-section area by the centreline circumference, equivalently evaluate two pi squared times R times r squared. With pi stored as 3.141592653589793, R equal to 5 and the squared minor radius equal to 9, the result is 888.2643960980423 cubic units. Use the full stored value of pi rather than a rounded approximation, and carry as many digits as the calculation allows so the answer is not distorted by premature rounding.

  5. 5

    Verify with the companion quantities

    Work out the surface area as four pi squared times R times r, giving 592.1762640653615 square units for the default inputs. The volume divided by the surface area should equal r divided by two, which here is 1.5000000000000002, confirming that the two results are consistent. If the major radius is doubled instead, the volume should exactly double; if the minor radius is doubled, it should quadruple. Passing these checks means the radii, their roles and the units have all been handled correctly.

Examples

Example 1: The worked default — major radius 5, minor radius 3

majorRadius
5
minorRadius
3
StepCalculationResult
Square the minor radiusminorRadius * minorRadius3 * 3 = 9
Cross-section areapiVal * minorSq28.274333882308138
Centreline circumference2 * piVal * majorRadius31.41592653589793
Apply the volume formula2 * piVal * piVal * majorRadius * minorSq888.2643960980423

Result: With a major radius of 5 and a minor radius of 3 the torus volume is 888.2643960980423 cubic units, the surface area is 592.1762640653615 square units, and the centreline measures 31.41592653589793 units around.

Example 2: A thicker tube — major radius 5, minor radius 6

majorRadius
5
minorRadius
6
StepCalculationResult
Square the minor radiusminorRadius * minorRadius6 * 6 = 36
Cross-section areapiVal * minorSq113.09733552923255
Apply the volume formula2 * piVal * piVal * majorRadius * minorSq3553.0575843921692

Result: With the major radius still 5 but the minor radius raised to 6, the volume becomes 3553.0575843921692 cubic units, exactly four times the default because the tube radius was squared.

Example 3: A wider ring — major radius 10, minor radius 3

majorRadius
10
minorRadius
3
StepCalculationResult
Centreline circumference2 * piVal * majorRadius62.83185307179586
Cross-section areapiVal * minorSq28.274333882308138
Apply the volume formula2 * piVal * piVal * majorRadius * minorSq1776.5287921960846

Result: Doubling the major radius to 10 while keeping the minor radius at 3 gives a volume of 1776.5287921960846 cubic units, exactly twice the default, while the cross-section stays at 28.274333882308138 square units.

Calculator

Volume of the torus

888.2644

Surface area
592.1763
Cross-section area
28.2743
Centreline circumference
31.4159

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the The Volume Of A Torus calculator page.

Common Mistakes

  • Swapping the two radii

    The major radius measures from the axis to the centre of the tube, while the minor radius is the radius of the tube itself. Exchanging them produces a plausible looking but entirely wrong answer, because the two play different roles. Label them explicitly on a sketch and check that the major radius is the larger of the two before substituting into the formula.

  • Forgetting to square the minor radius

    The volume depends on r squared, not on r. Using the tube radius to the first power makes the answer far too small and also breaks the scaling behaviour, so doubling the tube would appear to double rather than quadruple the volume. Write the r squared term first and substitute only after the expression is set out.

  • Confusing volume with surface area

    The volume formula is two pi squared R r squared, whereas the surface area is four pi squared R r. They are easy to mix up because both contain the same two radii and two factors of pi. Remembering that volume must have cubic units while area has square units is the quickest way to catch the slip before it reaches an answer.

  • Mixing length units

    If the major radius is given in centimetres and the minor radius in millimetres, the product has no coherent meaning. Convert both lengths to one common unit before starting, and report the volume in the corresponding cubic unit. A change of unit at the end is straightforward, but a change made halfway through a calculation is a reliable source of large errors.

  • Rounding pi too early

    Replacing pi with 3.14 might appear harmless, but the constant is used twice and the error is magnified by the squared radius. For the default dimensions the volume becomes noticeably smaller than the correct 888.2643960980423 cubic units. Use the full stored value of 3.141592653589793 and round only the final answer for presentation.

FAQ

What is a torus?

A torus is the solid formed when a circle is revolved around a straight axis lying in the same plane but outside the circle. It has the shape of a doughnut, with a hole at the centre and a circular cross-section. Two lengths describe it completely: the major radius from the axis to the centre of the tube and the minor radius of the tube itself.

What is the formula for the volume of a torus?

The volume is two pi squared times the major radius R times the square of the minor radius r, written V = 2 pi squared R r squared. It comes from multiplying the area of the generating circle by the circumference of the circle traced by its centre. For radii of 5 and 3 it gives 888.2643960980423 cubic units.

Why does pi appear twice in the formula?

One factor of pi comes from the area of the circular cross-section that is swept out, and the other comes from the circumference of the path the centre of that cross-section follows around the axis. Multiplying the two gives the two pi squared factor. The same reasoning explains why the surface area also contains pi squared.

Which radius has the greater effect on the volume?

The minor radius, because it is squared. Doubling the tube radius from 3 to 6 quadruples the volume, from 888.2643960980423 to 3553.0575843921692 cubic units. Doubling the major radius from 5 to 10 only doubles the volume, to 1776.5287921960846 cubic units, because it enters the formula linearly.

How is volume different from surface area for a torus?

Volume measures the space inside and is reported in cubic units, while surface area measures the curved skin and uses square units. Volume is two pi squared R r squared and grows with the square of the tube radius; surface area is four pi squared R r and grows linearly in both radii. At the default radii they are 888.2643960980423 and 592.1762640653615 respectively.

References