Geometry
Volume of a torus
The area of the generating circle multiplied by the circumference of the path its centre follows. With R equal to 5 and r equal to 3 the volume is 888.2643960980423 cubic units.
The Formula
V = 2 * pi^2 * R * r^2
The area of the generating circle multiplied by the circumference of the path its centre follows. With R equal to 5 and r equal to 3 the volume is 888.2643960980423 cubic units.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| R | Major radius | length | Distance from the axis of revolution to the centre of the tube, setting the size of the centreline. |
| r | Minor radius | length | Radius of the generating circle, squared in the volume formula and therefore the dominant input. |
| V | Enclosed volume | length cubed | The space inside the solid, measured in cubic units. |
What Each Symbol Means
Rlength
Major radius
Distance from the axis of revolution to the centre of the tube, setting the size of the centreline.
rlength
Minor radius
Radius of the generating circle, squared in the volume formula and therefore the dominant input.
Vlength cubed
Enclosed volume
The space inside the solid, measured in cubic units.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate the volume of a torus page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate The Volume Of A Torus, filed under Math. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Volume of a torus?
The formula for Volume of a torus is V = 2 * pi^2 * R * r^2. The area of the generating circle multiplied by the circumference of the path its centre follows. With R equal to 5 and r equal to 3 the volume is 888.2643960980423 cubic units.
What units should I use with Volume of a torus?
Substitute R in length, r in length, V in length cubed. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Volume of a torus?
Swapping the two radii. The major radius measures from the axis to the centre of the tube, while the minor radius is the radius of the tube itself. Exchanging them produces a plausible looking but entirely wrong answer, because the two play different roles. Label them explicitly on a sketch and check that the major radius is the larger of the two before substituting into the formula.