CCalclabhub

Geometry

Cross-section area and centreline circumference

The two component lengths and areas behind the main formula. Their product is the volume; for the defaults the cross-section is 28.274333882308138 square units and the centreline is 31.41592653589793 units around.

The Formula

Ac = pi * r^2 ; C = 2 * pi * R

The two component lengths and areas behind the main formula. Their product is the volume; for the defaults the cross-section is 28.274333882308138 square units and the centreline is 31.41592653589793 units around.

SymbolMeaning
AcCross-section area
rMinor radius
CCentreline circumference

What Each Symbol Means

Aclength squared

Cross-section area

Area of the generating disc, pi times the square of the minor radius.

rlength

Minor radius

The radius of the disc that is swept around the axis.

Clength

Centreline circumference

The distance the disc's centre travels in one full revolution, two pi times the major radius.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate the volume of a torus page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate The Volume Of A Torus, filed under Math. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Cross-section area and centreline circumference?

The formula for Cross-section area and centreline circumference is Ac = pi * r^2 ; C = 2 * pi * R. The two component lengths and areas behind the main formula. Their product is the volume; for the defaults the cross-section is 28.274333882308138 square units and the centreline is 31.41592653589793 units around.

What does each symbol in Cross-section area and centreline circumference stand for?

Ac is cross-section area; r is minor radius; C is centreline circumference.

What units should I use with Cross-section area and centreline circumference?

Substitute Ac in length squared, r in length, C in length. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Cross-section area and centreline circumference?

Confusing volume with surface area. The volume formula is two pi squared R r squared, whereas the surface area is four pi squared R r. They are easy to mix up because both contain the same two radii and two factors of pi. Remembering that volume must have cubic units while area has square units is the quickest way to catch the slip before it reaches an answer.