Math · 64 calculators
Volume Of A Torus Calculator
A torus volume calculation tells you how much space lies inside a doughnut-shaped solid, the shape made by spinning a circle around a straight axis in its own plane. The result depends on just two lengths: the major radius from the axis to the centre of the tube, and the minor radius of the tube itself. Because the minor radius is squared, a small change in tube thickness changes the enclosed volume far more than the same change in the size of the ring.
Volume of the torus
888.2644
- Surface area
- 592.1763
- Cross-section area
- 28.2743
- Centreline circumference
- 31.4159
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
V = 2 * pi^2 * R * r^2
- V
- Volume enclosed by the torus, in cubic units
- R
- Major radius, from the axis to the centre of the tube
- r
- Minor radius, the radius of the tube itself
- pi
- The constant 3.141592653589793, appearing twice in the formula
How to check the result by hand
- 1
Identify the two radii
Find the major radius R, measured from the axis of revolution out to the centre of the tube, and the minor radius r, measured across the tube from its centre to its surface. If a drawing gives diameters instead, halve each one first, because the formula works only with radii. Confirm that both measurements use the same unit and that R is greater than r, so the shape really has a hole. Labelling the two lengths clearly on paper at this stage prevents most of the substitution errors that follow.
- 2
Square the minor radius
Multiply the minor radius by itself to obtain r squared. With the default value r equal to 3 the square is 9. The calculator stores this value in a helper named minorSq precisely because it is needed more than once. Squaring before multiplying by anything else is important: the volume responds to the square of the tube radius, not to the radius alone, and reversing the order of operations gives a completely different answer.
- 3
Find the cross-section and the centreline
Compute the area of the generating disc as pi times the squared minor radius, which is 28.274333882308138 square units at the defaults. Then find the length of the path its centre travels, two pi times R, which is 31.41592653589793 units when R is 5. These two intermediate figures are reported alongside the main result and make the structure of the calculation visible. They also provide an easy way to check the final volume, since it is simply their product.
- 4
Apply the volume factor
Multiply the cross-section area by the centreline circumference, equivalently evaluate two pi squared times R times r squared. With pi stored as 3.141592653589793, R equal to 5 and the squared minor radius equal to 9, the result is 888.2643960980423 cubic units. Use the full stored value of pi rather than a rounded approximation, and carry as many digits as the calculation allows so the answer is not distorted by premature rounding.
- 5
Verify with the companion quantities
Work out the surface area as four pi squared times R times r, giving 592.1762640653615 square units for the default inputs. The volume divided by the surface area should equal r divided by two, which here is 1.5000000000000002, confirming that the two results are consistent. If the major radius is doubled instead, the volume should exactly double; if the minor radius is doubled, it should quadruple. Passing these checks means the radii, their roles and the units have all been handled correctly.
Common Questions
How does the Volume Of A Torus Calculator work?
Measure the major radius R from the axis to the centre of the tube and the minor radius r across the tube itself, then square r and multiply by R and by two times pi squared. With the defaults R = 5 and r = 3 the volume is 888.2643960980423 cubic units. The same inputs give a surface area of 592.1762640653615 square units, a cross-section area of 28.274333882308138 and a centreline circumference of 31.41592653589793 units.
What do I need to enter in the Volume Of A Torus Calculator?
It takes 2 inputs: Major radius, Minor radius. Fields that expect a unit say so next to the label.
Where does Volume of the torus come from?
It comes from V = 2 * pi^2 * R * r^2 — the area of the generating circle multiplied by the circumference of the path its centre follows. With R equal to 5 and r equal to 3 the volume is 888.2643960980423 cubic units.
What is the most common mistake with the Volume Of A Torus Calculator?
Swapping the two radii. The major radius measures from the axis to the centre of the tube, while the minor radius is the radius of the tube itself. Exchanging them produces a plausible looking but entirely wrong answer, because the two play different roles. Label them explicitly on a sketch and check that the major radius is the larger of the two before substituting into the formula.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Volume Of A Torus page.
