Electronics
Voltage at the load
What the equipment actually receives. A load can be outside its own tolerance band even when the percentage drop looks acceptable.
Last updated
The Formula
V_load = V_supply - V_drop
What the equipment actually receives. A load can be outside its own tolerance band even when the percentage drop looks acceptable.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| V_supply | Supply voltage | volts | Measured at the origin of the circuit. |
| V_drop | Voltage drop | volts | The loss along the run. |
| V_load | Voltage at the load | volts | The delivered voltage. |
What Each Symbol Means
V_supplyvolts
Supply voltage
Measured at the origin of the circuit.
V_dropvolts
Voltage drop
The loss along the run.
V_loadvolts
Voltage at the load
The delivered voltage.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate voltage drop page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Voltage Drop, filed under Science. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Voltage at the load?
The formula for Voltage at the load is V_load = V_supply - V_drop. What the equipment actually receives. A load can be outside its own tolerance band even when the percentage drop looks acceptable.
What does each symbol in Voltage at the load stand for?
V_supply is supply voltage; V_drop is voltage drop; V_load is voltage at the load.
What units should I use with Voltage at the load?
Substitute V_supply in volts, V_drop in volts, V_load in volts. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Voltage at the load?
Applying a single-phase factor to a three-phase circuit. A balanced three-phase circuit shares the return current between phases and uses the square root of three rather than two. Applying the single-phase factor overstates the drop on a three-phase run.