CCalclabhub

Geometry

Perimeter and the diagonal product

The perimeter is four times the side found in the second formula, while the product of the diagonals is exactly twice the area. For the default rhombus the product is 80 and the perimeter is about 25.612496949731394.

Last updated

The Formula

P = 4s, with d1 × d2 = 2A

The perimeter is four times the side found in the second formula, while the product of the diagonals is exactly twice the area. For the default rhombus the product is 80 and the perimeter is about 25.612496949731394.

SymbolMeaning
PPerimeter
sSide length

What Each Symbol Means

Plength

Perimeter

Total distance around the four equal sides.

slength

Side length

Found from the half-diagonals with Pythagoras before multiplying by four.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate the area of a rhombus page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate The Area Of A Rhombus, filed under Math. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Perimeter and the diagonal product?

The formula for Perimeter and the diagonal product is P = 4s, with d1 × d2 = 2A. The perimeter is four times the side found in the second formula, while the product of the diagonals is exactly twice the area. For the default rhombus the product is 80 and the perimeter is about 25.612496949731394.

What units should I use with Perimeter and the diagonal product?

Substitute P in length, s in length. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Perimeter and the diagonal product?

Treating the diagonals as the sides. The diagonals run between opposite corners and are generally longer than a side. Using a diagonal where a side belongs inflates the perimeter badly. Find the side first from the half-diagonals with Pythagoras, then multiply by four.