Electricity
Capacitance from charge and voltage
The defining relationship: capacitance is the charge stored per volt of potential difference. For a charge of 0.006 coulombs at 12 volts it gives 0.0005 farads.
The Formula
C = Q / V
The defining relationship: capacitance is the charge stored per volt of potential difference. For a charge of 0.006 coulombs at 12 volts it gives 0.0005 farads.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| Q | Stored charge | coulomb | Must be entered in coulombs, so microcoulombs need converting first. |
| V | Potential difference | volt | The voltage measured across the capacitor, in volts. |
| C | Capacitance | farad | The resulting ratio, one farad being one coulomb per volt. |
What Each Symbol Means
Qcoulomb
Stored charge
Must be entered in coulombs, so microcoulombs need converting first.
Vvolt
Potential difference
The voltage measured across the capacitor, in volts.
Cfarad
Capacitance
The resulting ratio, one farad being one coulomb per volt.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate capacitance page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Capacitance, filed under Science. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Capacitance from charge and voltage?
The formula for Capacitance from charge and voltage is C = Q / V. The defining relationship: capacitance is the charge stored per volt of potential difference. For a charge of 0.006 coulombs at 12 volts it gives 0.0005 farads.
What does each symbol in Capacitance from charge and voltage stand for?
Q is stored charge; V is potential difference; C is capacitance.
What units should I use with Capacitance from charge and voltage?
Substitute Q in coulomb, V in volt, C in farad. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Capacitance from charge and voltage?
Entering microcoulombs instead of coulombs. The defining ratio requires the charge in coulombs. Entering 6000 for a charge that is actually 6000.0 microcoulombs makes the capacitance a million times too large. Convert prefixed units to base SI units before substituting, and write the unit beside every number so the scale is visible at a glance.