Geometry
Area of an annulus
The outer circle's area minus the inner circle's area, factorised. With R equal to 5 and r equal to 3 the difference of squares is 16 and the area is 50.26548245743669 square units.
The Formula
A = pi * (R^2 - r^2)
The outer circle's area minus the inner circle's area, factorised. With R equal to 5 and r equal to 3 the difference of squares is 16 and the area is 50.26548245743669 square units.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| R | Outer radius | length | Distance from the shared centre to the outside edge. Its square drives most of the area. |
| r | Inner radius | length | Distance from the shared centre to the hole. Increasing it removes area from the ring. |
What Each Symbol Means
Rlength
Outer radius
Distance from the shared centre to the outside edge. Its square drives most of the area.
rlength
Inner radius
Distance from the shared centre to the hole. Increasing it removes area from the ring.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate the area of an annulus page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate The Area Of An Annulus, filed under Math. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Area of an annulus?
The formula for Area of an annulus is A = pi * (R^2 - r^2). The outer circle's area minus the inner circle's area, factorised. With R equal to 5 and r equal to 3 the difference of squares is 16 and the area is 50.26548245743669 square units.
What units should I use with Area of an annulus?
Substitute R in length, r in length. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Area of an annulus?
Using diameters instead of radii. The formula needs radii, so entering a diameter directly squares a number twice as large as it should be and inflates the area fourfold. If the dimensions are given across the circle, halve each one first and only then square. Writing down R and r separately before substituting makes this error easy to spot.