CCalclabhub

Math · 64 calculators

Area Of A Kite Calculator

The area of a kite is found from its two diagonals, which always cross at right angles. This page shows why halving their product gives the enclosed space, how to find the separate perimeter from the unequal sides, and how to avoid the unit and symmetry errors that catch most learners.

Last updated

Area

70

Perimeter
34
Diagonal product
140

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

A = (d1 x d2) / 2

d1
Length of the first diagonal
d2
Length of the second diagonal
shortSide
Length of each side in the shorter equal pair
longSide
Length of each side in the longer equal pair

How to check the result by hand

  1. 1

    Measure the two diagonals

    Find the full corner-to-corner length of each diagonal, not the distance from a corner to the crossing point. One of these diagonals lies on the axis of symmetry and bisects the other, so the two halves you see are not the two diagonals. Record both lengths in the same unit before doing anything else.

  2. 2

    Confirm the diagonals are perpendicular

    The half-product formula depends on the diagonals crossing at right angles, which is guaranteed for any true kite. If the shape is irregular and the crossing is not square, the shortcut does not apply and you must split the figure into triangles yourself. A quick check of the corner angles or a right-angle mark on the drawing is usually enough.

  3. 3

    Multiply the diagonal lengths

    Compute d1 x d2 to obtain the diagonalProduct. With diagonals of 10 and 14 this gives 140 square units, a number that is exactly twice the area. Keeping this intermediate product makes it simple to reverse the calculation later.

  4. 4

    Halve the product to get the area

    Divide the product by two: 140 divided by 2 is 70 square units in the default case. This step converts the twice-area product into the actual enclosed space. Check that the answer is smaller than the product and is expressed in square units.

  5. 5

    Find the perimeter separately

    The diagonals tell you nothing about the boundary, so measure the short and long side lengths and compute twice their sum. For sides of 6 and 11 the perimeter is 34 units. Compare the two results: here a perimeter of 34 units encloses an area of 70 square units, which is a plausible pairing for these dimensions.

Common Questions

How does the Area Of A Kite Calculator work?

Multiply the two diagonal lengths together, then divide by two. Because the diagonals of a kite are perpendicular, no angles or side lengths are needed for the area. The perimeter is a separate calculation: twice the sum of the short and long side lengths.

What do I need to enter in the Area Of A Kite Calculator?

It takes 4 inputs: First diagonal, Second diagonal, Short side, Long side. Fields that expect a unit say so next to the label.

Where does Area come from?

It comes from A = (d1 x d2) / 2 — the perpendicular diagonals split the kite into four right-angled triangles; summing their areas gives half the product of the two diagonal lengths.

What is the most common mistake with the Area Of A Kite Calculator?

Using half a diagonal instead of the whole length. Because one diagonal is bisected at the crossing, it is tempting to enter that half-length as a diagonal. The formula requires both full corner-to-corner lengths. In the default kite the halves of the bisected diagonal are 7 each, but the diagonal you multiply is the full 14.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Area Of A Kite page.