CCalclabhub

Business · 37 calculations

Marketing

How To Calculate Return On Ad Spend

Return on ad spend answers the most direct question in paid marketing: what revenue did each unit of advertising actually buy? It divides the sales attributed to a campaign by the cost of running it, giving a multiple that can be compared across adverts, channels and periods. Spending 5000 to generate 25000 gives a ROAS of 5.0, with 20000.0 left after the ad bill is paid.

Quick Answer

ROAS = revenue from ads / ad spend

ROAS
Return on ad spend, a dimensionless multiple
R
Revenue attributed to the advertising
A
Cost of the advertising that produced it

Divide the revenue generated by advertising by the amount spent on it. Spending 5000 to generate 25000 gives a ROAS of 5.0, meaning five units of revenue for each unit spent. Profit after ads is 20000.0, the break-even ROAS is 1.0 and ad spend as a share of revenue is 0.2, displayed as 20 per cent.

What Is Return On Ad Spend?

Return on ad spend, usually shortened to ROAS, is the revenue generated by advertising divided by the cost of that advertising. A ROAS of 5.0 means five units of revenue for each one unit spent. In the worked case revenue of 25000 from spend of 5000 gives exactly 5.0. The result is a plain multiple with no currency unit, which is what makes it comparable across campaigns of very different sizes.

The measure exists to answer a budget question. A marketing team with a fixed budget must decide which campaigns deserve more money, and a ratio of revenue to spend gives a common scale for that decision. A channel returning 5.0 is, on the surface, producing five times as much sales per unit of spend as one returning 1.0. The calculation is deliberately quick, using only two numbers that most advertising platforms report directly.

The break-even ROAS is one. At that point revenue exactly equals the advertising cost, so the campaign has covered its own bill but nothing else. Here the break-even figure is 1.0, while the actual ROAS of 5.0 is comfortably above it. Subtracting the spend from the revenue gives profit after ads of 20000.0, which is the cash left once the advertising invoice is paid. That subtraction is a simpler view than true profit, because it ignores stock, staff and overheads.

Ad spend as a share of revenue is the reciprocal of ROAS. Divide the spend of 5000 by revenue of 25000 and you get 0.2, displayed as 20 per cent. In other words one pound in every five of sales pays for the advertising. At a ROAS of 2.0 the share would be 0.5, and at the break-even point of 1.0 it would be 1.0, meaning all the sales go to the ad platform. The two figures say the same thing from opposite ends.

The direction is easy to check. Hold spend at 5000 and let revenue rise to 30000: the ROAS climbs from 5.0 to 6.0, and the spend share falls to about 16.7 per cent. Hold revenue at 25000 and let spend rise to 10000: the ROAS drops to 2.5, and the share doubles to 0.4. A change in the multiple can therefore come from better sales or from a higher bill, and those have very different implications for a budget decision. Always look at which input moved.

A high ROAS is not the same as a profitable business. Revenue arrives before the cost of goods is deducted, so a sale with a thin margin contributes far less than one with a fat margin. If the 25000 of sales in the worked case carries a gross margin of 30 per cent, it produces 7500 of gross profit, and deducting the 5000 advertising cost leaves 2500. The ROAS of 5.0 is unchanged by that margin, which is exactly why the number must never be read on its own.

Measurement is the hardest part in practice. An advert rarely causes a sale on its own, and a customer may see several adverts before buying. Last-click attribution gives all the credit to the final advert, while multi-touch models spread it across the journey and usually produce a lower ROAS for any single channel. View-through conversions, returns and cancelled orders can push the figure up or down. A disciplined calculation states the attribution window and the source of the revenue before comparing two campaigns.

ROAS is closely related to, but distinct from, other marketing measures. Conversion rate is the share of visitors who buy and says nothing about spend. Customer acquisition cost divides the marketing bill by the number of new customers, giving a currency amount instead of a ratio. Revenue growth rate tracks the direction of sales over time. Each answers a different question, and a well-run report shows them together rather than treating any one as the whole story.

The most useful habit is to pair the ratio with a margin and a time horizon. A campaign with a high ROAS that brings one-off bargain hunters may be worth less than one with a lower ROAS that brings repeat customers, and a first-order view can understate the value of a subscription. The calculator gives the four core outputs: ROAS of 5.0, profit after ads of 20000.0, break-even ROAS of 1.0 and an ad spend share of 0.2. Treat those as the starting point for a decision, not the decision itself.

Formula

ROAS = R / A

Formula page →

Revenue attributed to advertising divided by the cost of that advertising. With R equal to 25000 and A equal to 5000 the result is 5.0.

SymbolMeaning
RRevenue from ads
AAd spend

Revenue from ads minus the spend that produced it. At 25000 and 5000 the result is 20000.0, before other business costs are considered.

SymbolMeaning
RRevenue from ads
AAd spend

A/R = 1/ROAS

Formula page →

Ad spend as a fraction of revenue, the reciprocal of ROAS. With A equal to 5000 and R equal to 25000 the result is 0.2, shown as 20 per cent.

SymbolMeaning
AAd spend
RRevenue from ads

How To Calculate Return On Ad Spend

  1. 1

    Total the advertising spend

    Add up every cost of running the campaign over the period: media fees, platform charges and any creative or management expense you choose to include. In the worked case the spend is 5000. Be consistent about what is counted, because excluding a management fee will flatter the ratio and make two campaigns impossible to compare fairly.

  2. 2

    Measure the revenue the ads produced

    Take the sales credited to the campaign by your reporting system, here 25000. Check that the attribution window and the conversion rules match those used for the spend, and deduct refunds and cancellations where appropriate. A revenue figure pulled from a different window will quietly break the calculation even though the division itself is correct.

  3. 3

    Divide revenue by spend

    Compute ROAS as revenue divided by advertising cost. With 25000 over 5000 the answer is 5.0, so each unit of spend bought five units of sales. The calculator shows this as the primary result. Keep the raw multiple, and compare it with the break-even figure and with other campaigns using the same measurement rules.

  4. 4

    Subtract spend from revenue

    Work out the cash left after the advertising bill: 25000 minus 5000 gives 20000.0. This is profit after ads and is a useful companion to the multiple, because two campaigns with the same ROAS but different scales leave very different amounts of money behind. Remember that stock, staff and overheads are not deducted here.

  5. 5

    Express the spend as a share of revenue

    Divide the advertising cost by the revenue: 5000 over 25000 gives 0.2, which the interface displays as 20 per cent. The calculator stores the raw decimal 0.2 and the rendering layer adds the percentage sign, so the figure should not be multiplied by one hundred in the formula. At a ROAS of 5.0 this share is exactly one fifth of sales.

Examples

Example 1: The worked default — 5000 spend, 25000 revenue

adSpend
5000
revenueFromAds
25000
StepCalculationResult
Profit after adsrevenueFromAds - adSpend20000.0
Break-even ROASadSpend / adSpend1.0
Ad spend share of revenueadSpend / revenueFromAds0.2
Return on ad spendrevenueFromAds / adSpend5.0

Result: Spending 5000 to generate 25000 gives a ROAS of 5.0. Profit after ads is 20000.0, the break-even ROAS is 1.0 and ad spend is 0.2 of revenue, shown as 20 per cent.

Example 2: A smaller campaign with a strong return

adSpend
4000
revenueFromAds
14000
StepCalculationResult
Profit after adsrevenueFromAds - adSpend10000.0
Break-even ROASadSpend / adSpend1.0
Ad spend share of revenueadSpend / revenueFromAds0.2857142857142857
Return on ad spendrevenueFromAds / adSpend3.5

Result: Spending 4000 to generate 14000 gives a ROAS of 3.5. Profit after ads is 10000.0, the break-even ROAS is 1.0 and ad spend is roughly 28.57 per cent of revenue.

Example 3: A campaign that only covers its ad bill

adSpend
9000
revenueFromAds
9000
StepCalculationResult
Profit after adsrevenueFromAds - adSpend0.0
Break-even ROASadSpend / adSpend1.0
Ad spend share of revenueadSpend / revenueFromAds1.0
Return on ad spendrevenueFromAds / adSpend1.0

Result: Spending 9000 to generate 9000 gives a ROAS of 1.0. Profit after ads is 0.0 and ad spend is 1.0 of revenue, or 100 per cent.

Calculator

Return on ad spend

5

Profit after ads
$20,000.00
Break-even ROAS
1
Ad spend as a share of revenue
20.00%

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the Return On Ad Spend calculator page.

Common Mistakes

  • Using revenue instead of gross profit

    ROAS divides by spend but leaves the cost of goods untouched, so a campaign selling low-margin goods can look excellent while contributing almost nothing. If the 25000 of sales carries a 30 per cent gross margin, only 7500 remains before the 5000 ad cost. Always pair the multiple with a margin figure before deciding where to move the budget.

  • Ignoring the attribution window

    A seven-day and a thirty-day window can produce very different revenue totals for the same advert, and therefore very different ROAS figures. Last-click and multi-touch models also split credit differently between channels. State the window and the model beside every number, and never compare a figure from one platform with one from another without matching them.

  • Forgetting returns and cancelled orders

    Platform dashboards often report gross sales before refunds, so a campaign with a high ROAS may be generating orders that are later sent back. Net revenue is the honest denominator for the sales side. Deduct cancellations and returns, and check whether the reported figure includes tax and shipping that never reaches the business.

  • Treating ROAS as the only success measure

    A campaign can hit a strong ROAS by harvesting customers who would have bought anyway, or by attracting one-off discount seekers. Look at incremental sales, customer acquisition cost and repeat purchase behaviour as well. A slightly lower ROAS that brings durable new customers may be worth far more over a year.

  • Comparing unlike channels

    Brand search often shows a very high ROAS because it captures demand created elsewhere, while prospecting display adverts show a lower one because they create that demand. Judging the two on the multiple alone would cut the channel that feeds the other. Compare like with like, and consider a blended view across the whole account.

  • Misreading the break-even point

    A ROAS of 1.0 covers only the advertising bill, not the stock, staff and overheads behind the sale. The true profit break-even is higher, and its exact value depends on the gross margin. With a 30 per cent margin, advertising must stay below roughly 30 per cent of revenue for the campaign to contribute anything at all.

FAQ

What is a good return on ad spend?

It depends on your margin. At a 30 per cent gross margin, a ROAS near 3.3 covers both the goods and the advertising, so anything above that contributes profit. A high-margin digital product can thrive at a lower ROAS than a retailer selling physical stock. Compare against your own break-even and past campaigns rather than a universal number.

What does a ROAS of 5.0 mean?

It means five units of revenue for each unit spent on advertising. In the worked case 25000 of revenue from 5000 of spend gives 5.0, leaving 20000.0 after the ad bill. Ad spend is therefore one fifth of the sales, or 20 per cent. The figure says nothing about the margin on those sales.

Is the break-even ROAS always 1.0?

As a pure revenue-to-spend ratio, yes: 1.0 means sales exactly equal the advertising cost. That is only break-even for the ad budget, however. Once the cost of goods and other expenses are counted, the campaign must return more than 1.0 to make a genuine profit.

How is ROAS different from return on investment?

ROAS compares revenue with advertising spend alone, while return on investment compares profit with the total amount invested. The two use different numerators. A campaign can show a ROAS of 5.0 and still produce a poor return on investment once stock, staff and overheads are included.

Why is ad spend shown as a percentage?

It is the reciprocal of ROAS and answers a different question: what share of sales pays for the adverts? With 5000 spent and 25000 earned, the share is 0.2, which the page displays as 20 per cent. The calculator stores the raw decimal 0.2 and the rendering layer adds the percentage sign.

What can distort a ROAS figure?

Attribution windows, double counting across channels, refunds and sales that would have happened without the advert can all move the number. So can comparing campaigns of different sizes or different margins. Keep the measurement rules constant, subtract cancelled orders and read the ratio alongside a margin and a customer value figure.

References